Features
- Use mainstream STM32F722 chip
- Equipped with the latest 42688-P gyroscope
- 16M black box storage
- Integrated LC filter
- Upgrade type-C USB interface
- Directly plugged into the DJI Air Unit
- With TAKER H60_BLS 60A 4IN1 ESC, the flying feel is silky
- Simple and reasonable installation method, the shock absorber can make the gyroscope work very stably
- 9V@2.5A + 5V@3A dual independent BEC
Specifications
GEP-F722-HD v2 Flight Controller
- MCU?STM32F722
- IMU?ICM42688-P(SPI)
- Air Unit Connection?Direct plugging into DJI Air Unit
- Black Box?16M onboard
- USB Interface?Type-C
- OSD?BetaFlight OSD w/ AT7456E chip
- BEC?5V@3A,9V@2.5A dual BEC
- Firmware Target?GEPRCF722
- Size?36.85×36.85mm, hole 30.5×30.5mm??4mm hole becomes ?3mm after using a silicone shock-absorbing circle.
- Input Voltage?3-6S LiPo
- UART?5
- Power Filter?Integrated LC filter
- Weight?8.1g
TAKER H60_BLS 60A 4IN1 ESC
- Input Voltage: 3-6S Lipo
- Ammeter: Support
- Continue Current?60A
- Burst Current?65A?5 second?
- Support Protocol: Dshot 150/300/600
- Size?42×45.7mm?hole30.5×30.5mm??4mm hole becomes ?3mm after using the silicone shock-absorbing ring.
- Weight: 14.9g
- Target: B_X_30
Includes
1 x Flight Controller
1 x ESC
1 x Capacitor
1 x DJI Air Unit Adapter Cable
1 x Flight Controller Adapter Cable
1 x XT60 Power cable
4 x M3*30 Screws
4 x M3*25 Screws
8 x Nylon nuts
8 x Silicone grommets
2 x sh1.0 4pinsilicone cable
1 x Camera connection cable
