SpeedyBee AIO - F4 FC + 40A 3-6S 4-in-1 Bluejay ESC - 25x25

The SpeedyBee AIO - F4 FC + 40A 3-6S 4-in-1 Bluejay ESC combines a high-performance STM32F405 flight controller with a 40A ESC, supporting 3-6S LiPo batteries and DSHOT600/300 protocols. It offers Bluetooth BLE, wireless firmware updates, 8MB flash memory, and Betaflight compatibility, with multiple UART ports and LED pads for customization. Weighing only 13.6g, it provides reliable performance, easy recovery via the BOOT button, and powerful outputs for your drone system.

VIDEO: JUST RELEASED: NEW SPEEDYBEE F405 AIO 40A FLIGHT CONTROLLER

• Camera Parameter Adjustment via Betaflight CC pads supported
• Compatible with DJI O3, RunCam Link, Caddx Vista
• 25x25mm Mounting Pattern
• Battery Support 3-6S LiPo
• 40A Continuous Current
• Betaflight Compatibility
• 45A (10s) Burst Current
• Easy firmware recovery
• Flight Controller & ESC
• 8MB Flash Memory
• ICM-42688P Gyro
• BLE Bluetooth 
• Lightweight

FLIGHT CONTROLLER

• 6-pin DJI Sky Port Direct Insertion: Supported, can directly connect to DJI O3/RunCam Link/Caddx Vista without changing wire order
• BOOT Button: Supported, press and hold the BOOT button while powering on to enter DFU mode for firmware recovery
• 9V BEC Output: None (comes with an external BEC module, can switch between 5V and 9V); total current output 2A
• Wireless Flight Controller Firmware Update: Supported (no need to press physical BOOT button)
• DJI Air Unit Connection Method: Supports both 6-pin direct insertion and soldering
• UART: 4 full-function serial ports (UART3, UART4, UART5, UART6 + SBUS[R2])
• 5V BEC Output: Three 5V outputs, total current 2A (shared with 4V5)
• Supported Flight Controller Firmware: BetaFlight (Default), INAV
• Betaflight CC Pads (Camera Parameter Adjustment): Supported
• Dimensions: 33.0mm (length) x 33.0mm (width) x 8mm (height)
• Bluetooth BLE: Supported, Bluetooth speed enhancement 2.0
• LED Pads: Supported, used to control WS2812 LED lights
• Wireless Download & BlackBox Analysis: Not supported
• 4V5 Output: Two 4V5 outputs, total current 1A
• Firmware Target Name: SPEEDYBEE F405AIO
• Mounting: 25.5 x 25.5mm, 2mm hole diameter
• Buzzer Pads: Supported, BZ+ and BZ- pads
• Product Name: SpeedyBee F405 AIO
• Input Voltage: 3S-6S LiPo battery
• Weight: 13.6g (including CNC)
• SmartPort: Not supported
• Flash (for BlackBox): 8MB
• Barometer: SPA06-003
• USB Port Type: Type-C
• ESC Telemetry: None
• Gyro: ICM-42688P
• MCU: STM32F405
• RSSI Pads: None
• OSD: Supported
• Motor: M1-M4
• I2C: Supported

ESC

• ESC Protocol: Supports DSHOT600/300; other protocols may cause severe errors; please use with caution
• Output Voltage: VBAT battery voltage (used to power the flight controller)
• Current Sensor: Supported (Scale = 254, Offset = 0)
• Product Name: SpeedyBee F405 AIO
• Input Voltage: 3-6S LiPo battery
• Firmware: Bluejay JH-40 48kHz
• Continuous Current: 40A
• Burst Current: 45A (10s)

• 1x SpeedyBee AIO - F4 FC + 40A 3-6S 4-in-1 Bluejay ESC - 25x25
• 1x Black Heat Shrink Tube for Type-C Extension Module
• 1x 4-pin*80mm Cable for Type-C Extension Module
• 1x Transparent Heat Shrink Tube for External BEC
• 1x DJI Air Unit 6pin*80mm Connection Cable
• 4x M2*6.6mm Silicone Dampering Sleeve
• 1x 6-pin*30mm Cable for External BEC
• 1x 35V 470uF Electrolytic Capacitor
• 2x Capacitor Heat Shrink Tube
• 1x Type-C Extension Module
• 1x Practice Soldering Board
• 1x XT30 Power Cable (7cm)
• 1x Power Expansion Board
• 1x Hardware Set
• 1x User Manual
• 1x BEC

VIDEO: SPEEDYBEE F405 40A AIO FC REVIEW

VIDEO: DID THEY JUST BEST THEMSELVES? ???? | NEW SPEEDYBEE F405 40A AIO FLIGHT CONTROLLER REVIEW