DYS F7 Stack with F722 ICM42688P FC and AM32 65A 2-8S ESC

The new DYS F7 Flight Controller features an STM32F722 MCU, ICM42688P gyroscope, BMP280 barometer, and AT7456E OSD. It includes a 16MB black box, 6 UART ports, and 8 motor ESC signal. The BEC output offers 3.3V/1A, 5V/3A, and 12V/3A, while the unit itself measures 38mm x 38mm and weighs 10g. It is compatible with 6S Lipo input and features a mounting hole size of 30.5mm x 30.5mm/M3. Additionally, it has a VTX switch and an Air Unit port for added convenience.

The DYS 65A 4in1 ESC is running the AM32 Firmware and capable of handling an input voltage range of 2-8S Lipo. It can provide a continuous current of 65A and a burst current of 80A, with a weight of only 15.3g. With a current rate of 200 and a mounting hole size of 30.5mm x 30.5mm/M3, this ESC is a reliable and efficient choice for your setup.

We also carry the DYS F722 Flight Controller and the DYS AM32 65A 2-8S 4in1 ESC separately.

Specifications:

Flight Controller

• MCU: STM32F722
• Gyroscope: ICM42688P
• Barometer: BMP280
• OSD: AT7456E
• BEC Output: 3.3V/1A; 5V/3A; 12V/3A
• Black box: 16MB
• UART: 6 Ports
• ESC Signal: 8 Motors
• Air Unit Port: Yes
• VTX Switch: Yes
• Input: 6S Lipo
• Size: 38mm x 38mm
• Mounting Hole: 30.5mm x 30.5mm/M3
• Weight: 10g
  

4in1 ESC:

• AM32 firmware with F4 MCU
• Open Source firmware
• Firmware upgradable via Betaflight passthrough (make sure your Betaflight firmware is up to date when you try to use passthrough)
• Article explaining AM32 by Oscar Liang
• Input Voltage: 2-8S Lipo
• Continuous current: 65A
• Burst Current: 80A
• Weight: 15.3g
• Current Rate: 200
• Mounting Hole: 30.5mm x 30.5mm/M3

Package Includes:

• 1 x DYS F7 Stack with F722 Flight Controller and AM32 65A 2-8S 4in1 ESC