The Happymodel Mobula7 O4 micro FPV whoop comes out now . It comes with the new DJI O4 air unit which would provide excellent and unbelievable FPV footage. And the new Happymodel RS1102 KV10000 motor with HQPROP 45mm propellers , bring a powerful and smooth flying experience. This would be a good option for indoor and backyard FPV flying.

Features:

• Equipment with New DJI O4 air unit
  
• 2S battery support Powerful and Smooth freestyle flying
  
• UART ExpressLRS receiver support stable control link
  
• Lighter and small for indoor FPV

Specifications:

Motor

• Mode: RS1102 KV10000
  
• Configu-ration:9N12P
  
• Stator Diamter:11mm
  
• Stator Length:2mm
  
• Shaft Diameter:?1.5mm
  
• Motor Dimension(Dia.*Len):?13.5mm*14mm
  
• Weight(g):2.8g
  
• No.of Cells(Lipo):1-2S

Propellers:

• Weight:0.25g
  
• Material: Poly Carbonate
  
• Pitch:0.9
  
• Props Dia:45mm
  
• Hub Thickness:5mm
  
• Shaft:1.5mm

Flight controller:

• MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH)
  
• GYRO Sensor: BMI270  (SPI connection)
  
• Mount hole size: 25.5mm*25.5mm
  
• Power supply: 1-2S battery input (DC 2.9V-8.7V)
  
• Built-in 12A(each) Blheli_S 4in1 ESC
  
• Built-in Serial ExpressLRS 2.4G
  
• Built-in BMP280 Barometer
  
• Built-in 8MBp blackbox
  
• Built-in voltage meter sensor , voltage meter scale 110
  
• Built-in current meter sensor , current meter scale 470

Onboard 4in1 ESC:

• Power supply: 1-2S LiPo/LiPo HV
  
• Current: 12A continuous peak 15A (3 seconds)
  
• Support BLHeli_S Bluejay firmware
  
• Factory firmware: Bluejay ESC V0.19
  
• Firmware target: Z-H-30
  
• Default protocol: DSHOT300
  
• When use 1s battery and high KV 0702/0802 motors, should set startup power to 1100/1200

Onboard UART ExpressLRS 2.4GHz Receiver:

• Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
  
• RF Frequency: 2.4GHz
  
• Antenna: enameled copper wire 31mm length
  
• Telemetry output Power: <12dBm
  
• Default firmware version: ExpressLRS V3.0.1
  
• Firmware target: HappyModel EP 2400 RX
  
• Could update firmware via ExpressLRS configurator

DJI O4 Air Unit:

• Weight:
  Air Unit (camera module included): Approx. 8.2 g
  
• Transmission Module: 30×30×6 mm (L×W×H)
  
• Camera Module: 13.44×12.36×16.50 mm (L×W×H)
  
• Camera Cable Length: 50mm
  
• Coaxial Cable: 50 mm
  
• 3-in-1 Cable: 50 mm
  
• Operating Frequency:
  5.170-5.250 GHz
  5.725-5.850 GHz
  
• Operating frequency varies by region. Refer to local regulations.
  Transmitter Power (EIRP):
  5.1 GHz: <23 dBm (CE)
  5.8 GHz:
  <30 dBm (FCC)
  <14 dBm (CE)
  <30 dBm (SRRC)
  
• Live View Quality: 1080p at 30/50/60/100fps

 

***If you want to use DJI FPV Remote controller, please change betaflight settings like following picture,no need do any hardware modification to the flight controller:

Package Includes:

• 1 x Happymodel M80 Frame
• 1 x CrazyF405HD ELRS flight controller firmware target:BETAFLIGHTF4
• 4 x RS1102 KV10000 brushless motor
• 1 x HQPROP 45MMX2 bi-blade propellers(4cw+4ccw)
• 1 x DJI O4 Air unit
• 1 x Canopy
• 1 x Screw driver