Feature
1. Use mainstream STM32F722 chip
2. Equipped with the latest 42688-P gyroscope
3. 512M black box storage
4. Support Bluetooth parameter tuning
5. Integrated LC filter
6. Upgrade type-C USB interface
7.With TAKER H65_8S_BLS 65A 4IN1 ESC, silky flight
8. Directly plugs into the DJI Air Unit
9. Simple and effective installation with shock-absorbing mounts for stable gyroscope performance
10. Integrated Barometer
11. 9V@2.5A + 5V@3A dual independent BEC
Specifications
GEP-F722-BT-HD V3 Flight Controller
- MCU: STM32F722
- IMU?ICM42688-P(SPI)
- Air Unit Connection: Directly plugs into the DJI Air Unit
- Black Box: 512M onboard
- Bluetooth: Supported
- Barometer: Supported
- USB Interface: Type-C
- OSD: BetaFlight OSD w/ AT7456E chip
- BEC: 5V@3A, 9V@2.5A dual BEC
- Firmware Target: GEPRCF722_BT_HD_V3
- Size: 36.9×36.9mm, hole: 30.5×30.5mm, ?4mm hole becomes ?3mm after using a silicone shock-absorbing ring
- Input Voltage: 3-6S LiPo
- UART: 5 groups (UART4 fixed for Bluetooth)
- Power Filter: Integrated LC filter
- Weight: 8.2g
TAKER H65_8S_BLS 65A 4IN1 ESC
- Input Voltage: 3-8S Lipo
- Ammeter: Support
- Continue Current?65A
- Burst Current: 70A (5 second)
- Support Protocol: Dshot 150/300/600
- Size: 42×45.7mm, hole: 30.5×30.5mm, ?4mm hole becomes ?3mm after using the silicone shock-absorbing ring
- Weight: 14.9g
- Target: B_X_30
Includes
1 x FC board
1 x ESC board
1 x Capacitor
1 x O3 3-in-1 connection cable
1 x FC adapter cable
1 x sh1.0 4pin silicone cable
1 x Camera connection cable
1 x VTX connection cable
1 x XT60 power cable
4 x M3*30 screws
4 x M3*25 screws
8 x Nylon nuts
12 x Silicone anti-shake pads
