GEPRC TAKER F722 BLS 80A V2 STACK

Features

1. Use mainstream STM32F722 chip
2. Equipped with the latest 42688-P gyroscope
3. 16M black box storage
4. Integrated LC filter
5. Upgrade type-C USB interface
6. Directly plugged into the DJI Air Unit
7. With TAKER H80_BLS 80A 4IN1 ESC, Dual MOS, high current, silky flight
8. Simple and reasonable installation method, the shock absorber can make the gyroscope work very stably
9.  9V@2.5A + 5V@3A dual independent BEC

Specifications

GEP-F722-HD v2 Flight Controller

• MCU?STM32F722
• IMU?ICM42688-P(SPI)
• Air Unit Connection?Direct plugging into DJI Air Unit
• Black Box?16M onboard
• USB Interface?Type-C
• Barometer: support
• OSD?BetaFlight OSD w/ AT7456E chip
• BEC?5V@3A,9V@2.5A dual BEC
• Firmware Target?GEPRCF722
• Size?36.85×36.85mm, hole 30.5×30.5mm??4mm hole becomes ?3mm after using a silicone shock-absorbing circle.
• Input Voltage?3-6S LiPo
• UART?5
• Power Filter?Integrated LC filter
• Weight?8.1g

TAKER H80_BLS 80A 4IN1 ESC

• Input Voltage: 3-6S Lipo
• Ammeter: Support
• Continue Current?80A
• Burst Current?85A?5 second?
• Support Protocol: Dshot 150/300/600
• Size?56.3*61.1mm?hole30.5×30.5mm??4mm hole becomes ?3mm after using the silicone shock-absorbing ring.
• Weight: 28.1g
• Target: B_X_30