SpeedyBee F405 WING APP Fixed Wing Flight Controller

"SpeedyBee has recently introduced their first flight controller (FC) designed specifically for the fixed-wing community: the SpeedyBee F405 Wing APP. It’s currently the cheapest wing FC you can get. In this review, we’ll delve into the details of this affordable flight controller, walk you through its features and capabilities, and I’ll offer my final thoughts on the product." - Oscar Liang

Specifications

Product Name	SpeedyBee F405 WING FC board
MCU	STM32F405,168MHz,1MB Flash
IMU(Gyro&Accelerometer)	ICM-42688-P
Barometer	SPL006-001
OSD Chip	AT7456E
Blackbox	MicroSD Card Slot
UART	6 sets(USART1, USART2, USART3, UART4, UART5, UART6(Dedicated for Wireless board Telemetry connection))
I2C	1x Used for magnetometer, digital airspeed sensor
ADC	4x (VBAT, Current, RSSI, Analog AirSpeed)
PWM	12x (11+1“LED”pad)
ELRS/CRSF receiver	Supported,connected to UART1
SBUS	Built in inverter for SBUS input (UART2-RX)
LED	3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) 1x RGB
RSSI	Supported,Named as RS .
Supported FC Firmware	INAV:SpeedyBeeF405WING(default)ArduPilot: SpeedyBeeF405WING
Weight	8.9g

 

Product Name	SpeedyBee F405 WING PDB board
Input voltage range	7~36V (2~6S LiPo)
Battery Voltage Sensor	Connect to FC board VBAT, 1K:10K (Scale 1100 in iNav, BATT_VOLT_MULT 11.0 in ArduPilot)
Battery Current Sensor	90A continuous, 215A peak Connect to FC board Current (Scale 195 in iNav, 50 A/V in ArduPilot)
TVS Protective diode	Yes
FC BEC output	Output 5.2V +/- 0.1V DC Continuous current 2.4 Amps, 3A Peak Designed for FC, Receiver, GPS module, AirSpeed module, Telemetry module, WS2812 LED_Strip
VTX BEC output	Output 9V +/- 0.1V DC Continuous current 1.8 Amps, 2.3A Peak Voltage adjustable, 9V Default, 12V or 5V via jumper Designed for Analog Video Transmitter,Digital Video Transmitter, Camera.
Servo BEC output	Output 4.9V +/- 0.1V DC Continuous current 4.5 Amps, 5.5A Peak Voltage adjustable, 4.9V Default, 6V or 7.2V via jumper Designed for Servos.
Weight	11.4g

 

Product Name	SpeedyBee F405 WING Wireless board
Wireless Configuration (long press BOOT button for 6 seconds to switch modes)	BLE mode, connect to Speedybee APP
	Wi-Fi mode, connect to QGroundControl APP, Speedybee APP, MissionPlanner, etc.
	Classic Bluetooth SPP mode, connect to QGroundControl APP, MissionPlanner
LED strip controller (short press BOOT button to switch effects, long press 2 seconds to switch modes)	4x WS2812 LED strip connectors, adjustable colors and flashing modes
	Max 5.2V 1.3A, supports around 70pcs 5050 WS2812 LED beads
On-board battery level indicator	4x RGB indicator LED for battery level display by number of lights
Weight	4.2g

Manual

English ??