Introducing the Matek 600mw 1.3GHz Video Transmitter!
Features & Specifications
- 9CH_INTL version (1080MHz to 1360MHz)
- RF power output 28dBm (630mW)
- 6-36V DC IN (2-8S LiPo)
- Button control and LED indicators
- Built-in AGC microphone
- Power Consumption: <2.5W
- Video format: NTSC or PAL
- Audio Subcarrier: 6.5 MHz & 6.0MHz
- RF Connector: SMA
- Weight: 9g ( w/o antanna)
- Size: board 36*21.5mm
Pads
- + IN-: 6-36V DC input with reverse polarity protection
- VID: Video input
- G: Ground
- 5V: onboard regulator output, Max. 1.5A load on this pad
- Aud: Audio 6.5MHz input, onboard microphone shares this rail.
- TX & RX: UART for firmware update
Includes
- 1x 1.2/1.3G Video transmitter VTX-1G3-9(INTL version)
- 1x Dipole antenna_SMA, center freq 1240MHz
Settings
- Press and hold the button 2 seconds to enter the frequency setting. Frequency LED blinks
- Press the button to select the frequency
- When the LED blinks at new frequency, no RF output on this frequency.
- New frequency and output will be enabled if no button action within 3 seconds
*** CMS control is not supported for now
This product was added to our catalog on Tuesday 03 December, 2019.